Electronic Theatre Controls Source Four Revolution Manuel d'utilisateur télécharger pdf (Page 41)

Routine Maintenance 37

Adjusting rear lens belt:

Step 1: See General belt adjustment instructions:, page 34.

Step 2: Using both hands, gently move the IMF assembly forward toward the front lens

so that you can access the rear lens motor.

Step 3: Loosen, but do not remove, the two motor mounting screws so that the motor

moves freely.

Step 4: Move the motor back and forth to allow the spring to take up the slack in the belt.

Step 5: Tighten the top screw and then the bottom screw.

Step 6: Gently move the rear lens back and forth with both hands. There should be a

slight resistance.

Motor Adjustment

Screws.

Belt Tension

Motor

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Electronic Theatre Controls Source Four Revolution Manuel d'utilisateur Page 41